HHO Cars Break The Access Rules To Energy Your First HHO Cell Is Your First Step To Free Energy…. And Jeez ! It's So Good !


Announcement: HHO Cell Story

Posted under HHO Cell How It Works ?, HHO Cell Is it A Scam ? by admin

Is it possible to “burn” water instead of gas ?

Can You Actually Run Your Car on Water?

Is it just a scam ?

Or simply an old dream we can’t acheive ?

As you’re reading this, I guess you’ve heard here or there than eventually, it could be possible, with some luck, to power a car with water. You are a part of the minority ( not for long ) on the planet that have had some informations about it.

My goal is to help you definatly realize that it’s only reality. Specially if you live in the US, you may be just ignore that thousands of your fellow citizens are “burning” water in a HHO Cell each and every day !

They are no more wondering if it’s possible or not, they just do it !

They use water to increase mileage 20% – 60%  with a 1,2,3 simple system , easy to plug in and costless.

Yep, you really have seen “thousands of your fellow citizens” & “20% to 60%”

Let me explain… we only use 20% of the gas we put into our car’s gas tank. If you don’t believe me search it on GOOGLE or something. 80% of the gas that is put into our tanks is turned into pollution (unused gas).

It’s like burning banknotes……

Running your car on both water and gasoline greatly increases the combustion efficiency of the vehicle and allows its fuel to be burned more completely; which results in cleaner emissions, greater fuel economy, and increased performance.

It turns out that once you convert, you end up using 30% – 60% more gasoline to actually move your car, than you did before.

Now, how does it work ?

Paradoxically, it’s a 200 years old story….. Have you ever eard about electrolysis ?  Yep, it’s that simple !

A Hydrogen fuel cell or HHO Cell (also known as a HHO generator or electrolyzer) functions by splitting water into individual Oxygen and Hydrogen atoms.  Two Hydrogen atoms and one Oxygen atom are produced from each molecule of water through the process known as electrolysis :  Hydrogen, Hydrogen, Oxygen, capito ?

This process begins once electrical current is applied to the HHO cell, which is filled with a mixture of pure distilled water and an electrolyte, that is very often Baking Soda and for more advanced HHO Cell systems and users Sodium Hydroxide-NaOH or Potassium Hydroxide-KOH.

This combustible gas ( HHO ) is then drawn into the engine through the vehicle’s intake and burned in the cylinders in combination with the atomized gasoline (or diesel) + air, which is already being injected into the combustion chambers.

Here is the typical implementation of an HHO Cell :

HHO Cell Kit Install

Well, I know what some of you are thinking now :

Electrolysis is not profitable !!!…….

And you’re 100% right guys ! ( girls ? )

Producing HHO will cost more energy than burning HHO will restitute…. So why is it profitable anyway to burn HHO in your engine ?

It’s very simple : just don’t imagine that you will replace a part of your gasoline or diesel with HHO, because

This idea is 100% wrong !

We just need some HHO to be there to OPTIMIZE your air+gasoline mix, and there is no need for the electrolysis process to be profitable !

Can you feel the difference boys and girls ?

Now, imagine filling up your gas tank. Look at the price, now cut that in half. It’s not that bad of an investment!

I might say. Your car’s engine temperature is also a lot cooler, which gives it a longer life span.

These conversions are also reversible, you don’t have to hack off anything on your cars engine, or body in order for this to work. If you are leasing a vehicle, you can simply convert your car to run on both water and gas, and then take the conversion off once you turn the vehicle in.

So here you are ! This site is borned a few days ago, we will improve it day by day, and if you are already HHO users or not, you’ll find every thing you need to know to run a HHO Car. Explore this site, explore others, and make a decision !

The purpose of this system is encouraging the wide spread use of alternative fuels. Hydrogen plays an important role in abundant, safe energy for each of us, and the world at large.

Will you be a part of the HHO Move ?

Take care.

Christian, Your Brother In HHO !

Technorati Tags: , , , , , , , ,


How to connect in series ?

Posted under HHO Cell How To, HHO Cell Technicals by admin

This article talks about how to connect Mason Jar type HHO Cells

If you want to connect 2 or more Dry Cells, or any HHO cell using plates as electrodes, this article is not for you, refer to this article : How to connect HHO Cells parallel or refer to the manual that came with your Dry Cell.

For your information, Dry Cells are to be connected in parallel rather than serie : + on + & – on – …. Easy as your ABC !

Ok, that being said, let’s talk about how to connect Mason Jar type cells :

First a few tips to remember:

* Remember that the amperage in “hot” conditions from your HHO Cell is higher than the one in cold :

If you measure the amperage cold, one must imagine that when your HHO generator will have been running half an hour or more, it will be hotter and amperage will have increased considerably, often around 50%!. That is to say : if you have 4 amps cold, you’ll have about 6 hot …. Quite important if you don’t want water to boil….

* Do not exceed 4 amps/cell current consumption for Mason Jar type  HHO Cell. Tresspassing this is a potential overheating risk  that could damage the cell and possibly your engine. If you own a different HHO Cell (ie dry cell ) carefully follow the manufacturer’s instructions about it.

* Always prefer low amps soluce. One should always prefer an installation with two cells’ pulling 4 amps total (2/Cell ) rather than 1 single cell drawing 4 amps, your installation will run with a lower temp, and your electrodes life will be significantly longer

* When you add the electrolyte:

1 Always add small quantity, preferably ½ teaspoon.
2 Check amps with an ammeter to make sure not to exceed 4 amps per cell
3 Always use the manufacturer’s recommended electrolyte for your cell
4 Newbies are very often using baking soda as an electrolyte, great way to learn ! But compensation is to drain and replace your water / electrolyte every 1000 to 3000 km. The more amps, the more often you’ll have to change (1000 km) your mix.  See here other electrolytes you can use

* Remember always that using HHO gas, you became a pioneer in fuel burn, bravo!  The planet and your wallet are thanking you!
But BEWARE, that also means you are left to yourself, industrialization policy has not yet been through this, you are in an area with no rules and no established laws. Therefore caution be preferred in any circumstance

* Remind yourself that the HHO gas is highly flammable and electrolysis that involves chemical reactions. So unless you’re a chemist High flying: Do not play the little budding chemist!

If you want to learn more about how to determine the HHO production needed for your vehicle, you can read this article http://www.hhocellcarkits.com/hho-cell-technicals/how-much-hho-output-for-maximised-savings

Well, that being said, let’s head on over the assembly of several HHO Cells in series :

Series HHO Cell Car Kits Connection

Series HHO Cell Car Kits Connection

In the diagram we have chosen to connect the cells by pairs, the example shows 3X2 cells but the arrangement is the same for 2 or 2×2 cells.

Primary effect when choosing a series connection by pairs is to decrease the voltage to 6 volts in each cell. This is not a problem since electrolysis requires only 2 volts.
You can mount as many cells as you want while respecting the limits described in this article: http://www.hhocellcarkits.com/hho-cell-technicals/how-much-hho-output-for-maximised-savings

According to users testimony, connecting in series reduces the voltage and, again according to users testimony, thereby reduce the heating of water & eventual steaming. It’s a safer way to run your HHO Car

However be aware that : a series circuit will reduce the overall amperage consistently, you’ll be forced to double or triple the dose of bicarbonate or other electrolyte you use. Try to remember if you switch back to a single cell or a parallel connection…. Otherwise it could seriously boil in there!

You should also know: the series circuit by 3 or more HHO Cells is not recommended and you’ll notice right away yourself that this is not a good idea, Because the amperage decreases so much that it goes on almost nothing! So always 2 or 2X2 or 3X2, as in the picture.

If you have 3 cells to connect, you will of course find difficult to mount them in pairs … .. And a 3 Series, as stated above, it is not profitable. You can then opt for a parallel connection, it poses no problem when being reasonable on each cell amperage (3 to 3.5 amps when cold ) . Nothing more simple than a parallel connection: + on + & – on – ….. I’ll make you a drawing when I have time, or a small video!

– The advantage of parallel connection is that you do not increase the electrolyte dose, if you have 3 cells that draw 3 amps each, mounted in parallel will consume …? Won! 9 Amps in full. We have seen that the calculation is not as simple with a serial connection.

– The disadvantage is that you keep a voltage of 12 volts in each cell, which predisposes you to more easily overheat when overdosing electrolyte.

So to summarize : it is better to avoid odd numbers of Mason Jar HHO cells.  And if you need more than 2 or 3 cells of this type, you may consider to opt for a Dry Cell, which takes less space and cost not much more  than 3 or 4 jars.

Let’s continue on:

Start by finding a place and fix your additional cells next to your first cell. Then two things are to be changed : the electrical connection and vacuum system.
Nessecary stuff is usually supplied with the first cell and the additional cell.


On the “old” cell, disconnect the cable from the black terminal (ground) and reconnect it to the black terminal of the new cell.
Then connect the small red ( or whatever ) cable link supplied with the additional cell: one end to the black terminal of your first cell, and the other end on the red terminal of the new cell.

You just plug in your cells “in series”. 6 volts are now distributed to each cell.


Use the  T fittings supplied with your first cell and/or with additional cells for connecting all your cells.
If you install more than 2 additional cells it will be necessary to use a manifold …………………. to connect all cells together and then directs the HHO gas to the engine’s air intake.
Always keep check valve between the cells and engine. A single valve on the main hose is sufficient.

Where to find spare parts?

Listed below sites offer an interesting selection of parts, which can enable you to supplement or customize your installation.

HHO KitsDirect

Happy install everybody !

Christian, Your Brother In HHO.

Technorati Tags: , , , , , , , , , ,


Electrolysis is not profitable ! Yes….. But No !

Posted under HHO Cell How It Works ?, HHO Cell Is it A Scam ? by admin

Yes, I know Man, I know…. Electrolysis is not profitable !

I mean energy expended to produce HHO gas with electrolysis, is superior to the energy produced when burning HHO …..


So, can you tell me why HHO cells are so popular ?  Why trucks owners are mounting these devices like crazy ? Why me and my HHOaddicts friends are getting 20, 30, 40, 50% increase in mileage using a HHO Cell ?

There is a very, very, simple reason, and here it is :

Don’t start to think about HHO as something that will fuel your engine, BECAUSE THIS IDEA IS 100% WRONG !!!

HHO will not replace a part of the gas or diesel you usually burn. It will simply optimizes the way it burns.

You must know that 70 to 80% of gas or diesel is lost during the combustion process in a car engine. Take 100 bucks, drop 80 by the window, that’s what is happening when you drive your car….

Turning your vehicle in a HHO car Hybrid by installing a HHO Cell under the hood, just permits you to waste less fuel. AND THERE IS NO NEED FOR ELECTROLYSIS TO BE PROFITABLE ! We just need some HHO to be there !

It’s that simple !

Installing a HHO Cell under your car’s hood, permits you to use a higher % of fuel.

Well, however electrolysis is actually non profitable, that’s why there is a gas output level not to tresspass. After this point HHO production cost you more than it brings while optimizing fuel combustion. Here is a post on how to optimize your HHO production level : http://www.hhocellcarkits.com/hho-cell-technicals/how-much-hho-output-for-maximised-savings

By the mean time you can meditate on this :


More than one gallon is needed to bring one gallon inside your fuel tank…. Searching, extracting, shipping, refinement, re shipping are costing more energy than it brings back !

More….. You waste 70% of this precious liquid !

Happy Meditation.

Christian, Your Brother In HHO.

Technorati Tags: , , , , , , , , ,


Beware not to become HHO-aholic !

Posted under Do It Yourself HHO Cell, HHO Cell Users Testimonials by admin

This Guy is a Great ressource ! Can’t be more sincere.

Here is a list of stores where you can find do it yourself kits & parts :

DIY HHO Cell Kits on GreentechExpress

DIY HHO Cell Kits on HHO-Canada

DIY HHO Cell Kits on HHOKitsDirect

Ressources for Do It Yourself Plans :

PunhHHO Ebook + Videos DryCellPLans

A paid offer but you also can grab a free Dry Cell Plans PDF Ebook

HHOKitsDirect Ebook + Videos HHO Cell Plans

Do it Yourself Paid offer but  you can grab a 7 day free course.

Go Ahead Boys & Girls !

Technorati Tags: , , , , , , , ,