HHO CELL CAR KITS

HHO Cars Break The Access Rules To Energy Your First HHO Cell Is Your First Step To Free Energy…. And Jeez ! It's So Good !

Oct
13

How Much HHO Output For Maximised Savings ?

Posted under HHO Cell Technicals by admin

One of the most frequently asked question by a HHO Cell user !
How much HHO gas do I need to produce to save as much as possible gas?

Another one : Is there an ideal HHO Gas quantity ??

Another great one : Do I need to produce as much gas as possible?

There are still no clear answers to these questions, the HHO does not earn enough money, so …. no industrial and no official agency is interested in this case study, so no scientific data, we are left to ourselves, and after all, the better, because the day a politician will stick his nose in there, it will be as usual : We’ll be f….d ! ( forwarded ? Freaked ? … ? )

But we can still tell you what to do to optimize your HHO gas production and achieve maximum savings, ie, a “nickel chromium” setting can save you up to 50% fuel !

So let’s go :

Well, before we go, here is an indication :

All HHO cell users with little experience, whether in the United States or Europe agree that the ideal gas production per minute is between 1/4 and 1/2 of the cylinders volume of your future HHO car. For example if your engine is 2 liter, it takes 0.5 to 1 liter per minute HHO gas output to get significant savings

My advice :

I sincerely believe that the truth is quite close to 1/2
Ok, so let’s go this time !
Many believe that the more you produce gas the more you realize fuel economy, they often think that electricity needed for electrolysis of water is somehow “free” since in any case, the motor turns… Both assertions are false!

Here’s why:

When the engine is running, and there is a need for electricity, it transmits its energy through a belt to the alternator, which then produces the electricity. This electricity is in fact a measurable rotation brake  of the engine, so it causes excessive fuel consumption to fight against the resistance of the alternator. If for example you’re going downhil, you should re-accelerate earlier at the bottom of the descent to maintain your speed. The electrical energy produced by the alternator cost you fuel.

Now look at the HHO gas side. When we burn it, it returns less energy than the energy expended to create it … More, there are several energy conversions involved, as there is no 100% possible efficiency, energy is lost during each conversion.

The conversions are: mechanical to electrical (generator), electrical to chemical (electrolysis), chemical to mechanical (burning the HHO). Finally, once HHO gas burned, you will not be returned more than 20-25% of the energy used to create it…..
But do not despair immediately, the fuel savings are still achievable with this energy!

HHO benefit is not realized because it substitute to your regular fuel, but because it optimizes the combustion of fuel.
Our exhaust  are filled with unused particles, there is an enormous amount of energy unused, and the HHO gas simply allows us to “recover” a part of this raging waste. And a small part of a huge amount, is very interesting. My banker told me that long ago ! This makes the HHO precious.

Nevertheless there is a limit, an optimum amount of gas which, if you trespass, begin to increase your consomption again. At this moment the energy consumed to produce the HHO is greater than what is restituted when optimizing your air/fuel mix combustion.

Currently the only way to know the volume of gas you need is the method “test – errors” :

At each refueling, gradually increase your gas production.

# 1 With bicarbonate, or whatever electrolyte you use, addition in your HHO Cell tank, giving yourself a 50-60 °C temp limit ( 60 is pretty high ) of the water in your generator after a continuous 15-30 minutes work. When the weather is hot this limit will prevent you from reaching too high a temperature that can damage the generator and/or cause the water suction in your engine.

# 2 Or, if you’ve already reached the temp limit, adding a cell to produce additional gas … .. You just change the configuration of your system, meaning that ie, in the Mason Jar HHO Cell configuration you now have 2 cells connected in serie, using 6 volts each, instead of 1 cell with 12 volts. You should know that electrolysis does need no more  than 2 volts, so in a single cell device, 10 volts are “lost” and only  produce heat & steam. For plates electrodes it’s a bit different, you must refer to your owner manual when connecting 2 cells.
Then If you want to restart at the same gas production level, repeat the above described, knowing still that: a series connection will reduce the overall amperage consistently, you’ll be forced to double or triple the quantity of bicarbonate or other electrolyte you use . Try to remember what you’ve done if you switch back to a single cell or a parallel connection. … Otherwise it could seriously boil  in there!

You should also know that the 3 or more series circuit is not recommended and you’ll notice right away yourself that this is not a good idea, because the amperage decreases so that it finally turns to almost nothing! In a Mason Jar system you even can ad as much as electrolyte you want in a 3 serie circuit, you’ll never bypass a total 5-7 amps for your install ! This is due to wide space between electrodes + reduced ( compared to plates ) electrode surface

Personally I opted for a parallel connection for my 3 set Mason Jar system,  keeping reasonable amperage of each cell (3 to 3.5 amp when cold ) it poses no problem.

That being said, an ammeter is the best way to measure and store the right amount of baking soda, in all  FIGS  cases.

Well, whatever HHO cell you use, at some point you’ll reach your fuel economy peak (without knowing it ) and when you add electrolyte again, your fuel savings will begin to diminish, you know now that the previous dosage was the best one ! Just need to drain your HHO generator and fill again with water/electrolyte ideal mixing or mess up with taking of some mix, replace with water, mesure amps,  and repeat until you’ve reached the desired value.

To help you:

– 3 to 4 flat teaspoons and/or 4 amps for a basic HHO cell (used alone or in parallel) ie,WalkingEagleSolution or GreenTechexpress, represents a not to cross boundary.

– 1 teaspoon of baking soda in a Mason Jar HHO cell type (used alone or in parallel)  generates a consumption of about 1 amps and gas production of 0.1 liter/minute

Add the bicarbonate or a ½ teaspoon after each refueling, always use the same spoon to always add the same amount, or if you get one a digital scale. You can find very affordable scales on amazon

I hope this article will help you optimize your settings. All this may seem a bit complicated, but it’s worth it. Feel free to leave a comment and tell us how all this is running for you !

Whish you nice savings.

Christian, Your Brother in HHO.

Technorati Tags: , , , , , , , , ,